View PA035XSE_7703916.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:1 version : 7.0 technical specification model no : PA035XSE the content of this information is s ubject to be changed without notice. please contact pvi or its agent for further information. customer?s confirmation customer date by pvi?s confirmation confirmed by prepared by p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:2 revision history rev. issued date revised contents 0.1 feb.3,2004 new 1.0 mar.2,2004 updata page:24 12. reliability test vibration test& shocktest ok 1.1 oct.6,2004 updata page9:note 8-5 b/l lamp voltage kick-off time 1.2 oc.21,2004 modify page 10: 8-5) timing characteristics of input signals page 13: fig.8-2 horizontal start pixel 1.3 jan.20,2005 updata: page 20: lamp current about 5ma brightness & lamp life time. 1.4 nov.21.2005 modify page 9 : 8-3) backlight driving starting voltage (25 ) vs(max)=400vrms chang vs(max)=440vrms starting voltage (0 ) vs(max)=520vrms chang vs(max)=530vrms 1.5 mar,09,2006 modify page 26/27 : packing 7.0 nov,08,2007 modify page 27: 14.delete carton and change packing p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:3 technical specification contents no. item page - cover 1 - revision history 2 - contents 3 1 application 4 2 features 4 3 mechanical specifications 4 4 mechanical drawing of tft-lcd module 5 5 input / output terminals 6 6 pixel arrangement 8 7 absolute maximum ratings 9 8 electrical characteristics 9 9 power on sequence 20 10 optical characteristics 20 11 handling cautions 24 12 reliability test 25 13 block diagram 26 14 packing 27 p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:4 1.application this technical specification applies to 3.5? color tft-lcd module , PA035XSE the applications of the panel are car tv, portable dvd, gps, multimedia applications and others av system.. 2. features . compatible with ntsc & pal system . pixel in delta configuration . slim and compact . image reversion : up/down and left/right . optimum viewing direction 6 o?clock 3. mechanical specifications parameter specifications unit screen size 3.5(diagonal) inch display format 320 (r,g,b) 234 dot active area 71.6(h) 52.65(v) mm pixel pitch 0.2237(h) 0.225(v) mm pixel configuration delta black-light ccfl,1 tube outline dimension 83.7(w) 68.6(h) 6.6(d)(typ.) mm surface treatment anti ? glare weight 58 5 g gray scale inversion direction 6 o?clock [ note 10-1 ] p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:5 4. mechanical drawing of tft-lcd module p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:6 5. input / output terminals tft-lcd module connector fpc down connect , 28pins , pitch : 0.5 mm pin no symbol i/o description remark 1 sth1 i/o start pulse for source driver note 5 ? 5 2 av ss i analog gnd for source driver 3 av dd i analog power input for source driver note 5 ? 3 4 v b i video input b 5 v g i video input g 6 v r i video input r note 5 ? 1 7 v ss i digital gnd 8 v dd i digital power input note 5 ? 3 9 cph1 i sampling and shift clock for source driver 10 cph2 i sampling and shift clock for source driver 11 cph3 i sampling and shift clock for source driver note 5 ? 6 12 sth2 i/o start pulse for source driver note 5 ? 5 13 q2h i video input rotation control 14 inh i output enable for source driver 15 r/l i left/right control for source driver note 5 ? 5 16 v com i common electrode voltage 17 v com i common electrode voltage note 5 ? 1 18 xoe i output enable for gate driver 19 cpv i clock input for gate driver 20 u/d i up/down control for gate driver 21 dio2 i/o vertical start pulse 22 dio1 i/o vertical start pulse note 5 ? 5 23 v gl i gate off voltage(alternative every 1-h) note 5 ? 1 24 v ee i gate driver negative voltage note 5 ? 2 25 v ss i gnd 26 v cc i logic power for gate driver note 5 ? 3 27 v gh i gate on voltage note 5 ? 4 28 gnd - b/l case gnd p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:7 note 5 ? 1 : v com (typ.) = 6.0v pp . phase of the video signal input and v com the relation between these values could refer to 8-1 operating condition. fig.1 liquid crystal transmission of the video signal input, v com and timing v com h level l level video signal input maximum black white video signal input minimum white black white : maximum transmission / black : minimum transmission note 5 ? 2 : v ee (typ.) = -15v note 5 ? 3 : v dd , v cc (typ.) = +3.3v , av dd (typ.) = +5.0v note 5 ? 4 : v gh (typ.) = +17v 100% white pedestal composite video signal r,g,b video signal ( v r , v g , v b ) v com 1h 1h v gl v gl ac v gl dc v com dc v com ac v i ac v i dc p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:8 note 5 ? 5 : sth1, sth2 and r/l mode dio1,dio2,and u/d mode note 5 ? 6: the cph1 reference fig.8-1 sampling clock timing cph2 and cph3 connect g nd. 6. pixel arrangement r/l sth1 sth2 remark high( v dd ) input output left to right low(0 volt.) output input right to left u/d dio1 dio2 remark high( v cc ) input output down to up low(0 volt.) output input up to down p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:9 7. absolute maximum ratings : the followings are maximum values , which if exceeded, may cause faulty operation or damage to the unit. gnd = 0v ta = 25 parameter symbol min. max. unit remark av dd -0.3 +7.0 v supply voltage for source driver v dd -0.3 +7.0 v h level v gh -0.3 +45 v l level v gl -23 +0.3 v supply voltage for gate driver v gh -v gl +15 +40 v 8. electrical characteristics 8-1) operating condition parameter symbol min. typ. max. unit remark analog av dd +4.5 +5.0 +5.5 v +3.0 +3.3 +3.6 v supply voltage for source driver logic v dd +4.5 +5.0 +5.5 v depend on t/c signal voltage v gh +15.0 +17.0 +19.0 v v ee -15.5 -15.0 -14.5 v v gl dc -12.5 -11.0 -9.5 v dc component of v gl v gl ac - +6.0 - v p-p ac component of v gl +3.0 +3.3 +3.6 v supply voltage for gate driver logic v cc +4.5 +5.0 +5.5 v depend on t/c signal voltage v iac - +3.6 +4.0 v note 8-2 analog signal input level (vr , vg , vb) v idc - +2.5 - v h level v ih +0.7 v dd - - v digital input voltage l level v il - - +0.3v dd v v com ac - +6.0 - v p-p ac component of v com v com v com dc - +0.96 - v dc component of v com note 8-1 note 8-1 : pvi strongly suggests that the v com dc level shall be adjustable ,and the adjustable level range is 0.96v 1v,every module?s v com dc level shall be carefully adjusted to show a best image performance. p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:10 note 8-2: both ntsc and pal system video signal input waveform is based on 8 steps gray scale. 8-2) current consumption (gnd=0v) ta= 25 parameter symbol condition min. typ. max. unit remark i gh v gh =+17v - 0.055 0.083 ma i gl v gl =-12v - 0.067 0.087 ma v gl center voltage i cc v cc =+3.3v - 0.441 0.563 ma ai dd v dd =+3.3v - 1.2 3 ma i ee v ee =-15v - 0.441 0.6 ma current for driver i dd av dd =+5v - 7 10 ma 8-3) backlight driving & power consumption pin no symbol description remark 1 vl1 input terminal (hi voltage side) 2 vl3 input terminal (low voltage side) note 8-3 note 8-3 : low voltage side of backlight inve rter connects with ground of inverter circuits. ta= 25 parameter symbol min. typ. max. unit remark lamp voltage v l - 265 - vrms lamp current i l 2 3 5 ma note 8-4 lamp frequency p l 25 35 65 khz note 8-5 starting voltage (25 ) (reference voltage) vs - - 440 vrms note 8-6 starting voltage (0 ) (reference voltage) vs - - 530 vrms note 8-6 note 8-4 : in order to satisfy the quality of b/l, no matter use what kind of inverter,the output lamp current must between min. and max. to avoid the abnormal display image caused by b/l. note 8-5: the waveform of lamp driving voltage should be as closed to a perfect sin wave as possible. note 8-6 : the? max of starting voltage ? means the minimum voltage of inverter to turn on the ccfl. and it should be applied to the lamp for more than 1 second to start up. otherwise the lamp may not be turned on. black white black white 3.6~4.0v p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:11 power consumption ta= 25 parameter symbol conditions typ. unit remark lcd panel power consumption 50 mw backlight lamp power consumption 0.65 w note 8-7 total power consumption 0.69 w note 8-7 backlight lamp power consumption is calculated by i l v l . 8-4) input / output connector 6. backlight connector jst bhr-03vs-1, pin no. : 3 , pitch : 4 mm 8-5) timing characteristics of input signals characteristics symbol min. typ. max. unit remark 1field scanning period t1v - 262.5 - h 1line scanning period t1h - 63.5 - s source driver operating frequency fhc 4 6.4 8 mhz signal sampling pulse width tchw 125 156.25 250 ns signal sampling pulse delay tchd 47.65 52 58.25 ns tchd 12,23 signal sampling pulse width(h) tchwh 71.45 78.12 87.35 ns signal sampling pulse delay(l) tchwl 71.45 78.12 87.35 ns source start signal pulse width tshw 45 156.25 315 ns *tshset=tshhld source start signal setup time tshset 20 78.12 - ns source start signal hold time tshhld 20 78.12 - ns source output enable pulse width tohw 1.0 2.0 - s source start signal rising time tss - 9.8 - s video input signal start point tvs - 10.0 - s phase difference between xoe&cpv toc 1.5 2.3 - s gate clock period tcvw 10 63.5 - s gate clock pulse width(h) tcvwh 10 31.7 48 s gate clock pulse width(l) tcvwl 10 31.7 48 s gate start signal pulse width tsvw 5 63.5 126** s **tsvset=tsvhld gate start signal setup time tsvset 5 53.2 - s gate start signal hold time tsvhld 5 10.3 - s phase difference between inh&sth tosp - 4 - s phase difference between sync&inh tohs - 1.4 - s gate output enable pulse width toev - 2.5 - s v com delay time t dcom - - 3 s rgb delay time t drgb - - 2 s vertical display start tsv - 3 - th p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:12 8 ? 6 ) signal timing waveforms 2 3 4 5 6 7 19 20 21 22 23 265 266 267 268 269 286 285 284 283 282 (22h~256h) (285h~519h) t1v=262.5h 1st display period 2nd display period tsvw hd vd xout dio fig. 8-1 vertical start line for ntsc p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:13 6246251234 2526272829 312 313 314 315 316 340 339 338 337 336 (28h~299h) (339h~611h) t1v=312.5h 1st display period 2nd display period tsvw hd vd xout dio fig. 8-1 vertical start line for pal ? ? 3 3 ? ? 3 3 ? ? ? 3 ? ? 3 ? ? ? 3 3 ? ? ? ? ? 3 ? 3 e 3 ? ? 3 ? ? 3 ? ? 3 ? ? 3 3 ? ? ? 3 3 3 3 3 3 3 ? ? 3 ? ? 3 3 ? ? ? 3 ? ? 3 ? ? ? ? ? 3 3 ? ? ? ? ? 3 ? 3 e 3 ? ? 3 ? ? 3 ? ? 3 ? ? 3 3 ? ? ? p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:14 t1h=406 cphclk=63.5u sec tshw 123 406 405 320 invalidity data validity data invalidity data 12 321 404 sth1,2 cph1 r,g,b fig. 8-2 horizontal start pixel p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:15 hd sth1,2 inh cpv xoe q2h v com v r,g,b tss tshw tosp tohw tohs tcvw tcvwh toc toev t dcom t drgb tvs tcvwl fig. 8-3 detail horizontal timing p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:16 tchw tchwh tchwl tchd12 tchd23 tshset tshhld tshw r1 (b1) g1 (r1) r2 (b2) g2 (r2) b1 (g1) b2 (g2) cph 1 cph 2 cph 3 sth 1,2 r3 (b3) fig. 8-4 sampling clock timing p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:17 tcvw tcvwh tcvwl tsvset tsvhld tsvw cpv dio 1,2 fig. 8-5 vertical shift clock timing p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:18 vertical timing (from up to down) display on panel first line v com (odd field) v com (even field) hd vd dio1 q2h tsv fig. 8-6(a) vertical timing (from up to down) brg rgb v(r,g,b) odd field v(r,g,b) even field p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:19 vertical timing (from down to up) display on panel first line tsv hd vd dio2 q2h v com (odd field) v com (even field) fig. 8-6(b) vertical tim ing (from down to up) brg rgb v(r,g,b) even field v(r,g,b) odd field p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:20 9. power on sequence the power on sequence only effect by v cc ,v ss ,v dd ,v ee and v gh, the others do not care. 1) 10ms Q t1 PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:21 note 10-1 : the definitions of viewing angles luminance when testing point is white note 10-2 : cr luminance when testing point is black (testing configuration see 10-2 ) contrast ratio is measured in optimum common electrode voltage. note 10-3 : 1. topcon bm-7(fast) luminance meter 1 field of view is used in the testing (after 20~30 minutes operation). 2. lamp current 3ma & 5ma 3. inverter model : tdk-347. note 10-4 : the definition of response time : 100% 90% 10% 0% white white brightness black t r t f p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:22 note 10-5: lamp life time 3ma about 30000hrs ; 5ma about 20000hrs note 10-6: the uniformity of lcd is defined as the minimum brightness of the 9 testing points u = the maximum brightness of the 9 testing points luminance meter : bm-5a or bm-7 fast(topcon) measurement distance : 500 mm +/- 50 mm ambient illumination : < 1 lux measuring direction : perpendicular to the surface of module the test pattern is white (gray level 63). 1/6 1/6 2/6 2/6 1/6 1/6 2/6 2/6 p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:23 10-2) testing configuration y lcd display y r, g, b waveform of pattern a at testing point y r, g, b waveform of pattern b at testing point 500mm bm-7(fast) lcd backlight r,g,b signal pattern generator input pattern a pattern b testing point testing point 63.6 s 63.6 s 63.6 s 63.6 s caution: 1. environmental illumination Q 1 lux 2. before test cr, vcom voltage must be adjusted carefully to get the best cr. vcom rgb waveform rgb waveform vcom vb=5.0v +/- 0.2v vw=1.3v +/- 0.2v p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:24 11. handling cautions 11-1) mounting of module a) please power off the module when you connect the input/output connector. b) please connect the ground pattern of the inverter circuit surely. if the connection is not perfect, some following problems may happen possibly. 1.the noise from the backlight unit will increase. 2.the output from inverter circuit will be unstable. 3.in some cases a part of module will heat. 6. polarizer which is made of soft material and susceptible to flaw must be handled carefully. 6. protective film (laminator) is applied on surf ace to protect it against scratches and dirts. it is recommended to peel off the laminator before use and taking care of static electricity. 11-2) precautions in mounting a) when metal part of the tft-lcd module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) wipe off water drops or finger grease i mmediately. long contact with water may cause discoloration or spots. c) tft-lcd module uses glass which breaks or cracks easily if dropped or bumped on hard surface. please handle with care. d) since cmos lsi is used in the module. so take care of static electricity and earth yourself when handling. 11-3) adjusting module a) adjusting volumes on the rear face of the module have been set optimally before shipment. b) therefore, do not change any adjusted values. if adjusted values are changed, the specifications described may not be satisfied. 11-4) others a) do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) store the module at a room temperature place. c) the voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) if lcd panel breaks, it is possibly that the liquid crystal escapes from the panel. avoid putting it into eyes or mouth. when liquid crystal sticks on hands, clothes or feet. wash it out immediately with soap. e) observe all other precautionary requirements in handling general electronic components. f) please adjust the voltage of common electrode as material of attachment by 1 module. p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:25 12. reliability test no test item test condition 1 high temperature storage test ta = +70 , 240 hrs 2 low temperature storage test ta = -20 , 240 hrs 3 high temperature operation test ta = +60 , 240 hrs 4 low temperature operation test ta = 0 , 240 hrs 5 high temperature & high humidity operation test ta = +60 , 90%rh, 240 hrs 6 thermal cycling test (non-operating) -25 +70 , 200 cycles 30 min 30 min 7 vibration test (non-operating) frequency 10 ~ 55 h z amplitude 1.5 mm sweep time: 11 mins test period : 6 cycles for each direction of x, y, z 8 shock test (non-operating) 100g, 6ms direction : x, y, z cycle : 3 times 9 electrostatic discharge test (non-operating) 200pf, 0 200v 1 time / each terminal ta: ambient temperature [criteria] in the standard conditions, there is not display function ng issue occurred. (including: line defect , no image). all the cosmetic specification is judged before the reliability stress. p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:26 13. block diagram lcd panel h driver (source) back-light input inverter v driver (gate) p-511-175(v:7)
PA035XSE the information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of prime view international co., ltd. page:27 14. packing p-511-175(v:7)

▲Up To Search▲

Price & Availability of PA035XSE

	To Download PA035XSE Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .